Mr. Color GX 114 - Super Smooth Clear Flat (GX114)

Mr. Hobby Mr. Color GX 114 - Super Smooth Clear Flat (GX114) is a premium, lacquer-based flat (matte) clear topcoat from Gunze Sangyo's Mr. Color GX line, specially formulated to deliver an ultra-smooth, dead-flat finish with exceptional leveling properties and minimal risk of frosting or clouding — even on large or complex surfaces.

This is the "Super Smooth" version of Mr. Color flat clears, designed for modelers who demand the flattest possible matte coat without orange peel, grain, or uneven sheen. It's particularly popular for Gunpla (HG, MG, RG, PG), military aircraft, armor, and any kit where a realistic, non-reflective surface is critical.

Key Characteristics

• Type: Lacquer-based clear coat (solvent-based, fast-drying)
• Finish: Ultra-dead flat / super matte — one of the flattest clears available, with almost no residual sheen even under bright lights.
• Leveling: "Super Smooth" formula self-levels exceptionally well — reduces orange peel and clouding compared to standard Mr. Super Clear Flat or GX 113.
• UV Protection: Contains UV inhibitors to prevent long-term yellowing/fading (though not as strong as GX 112/113 UV Cut series — still excellent for most display conditions).
• Bottle Size: 18 ml (standard small jar, enough for multiple kits when airbrushed)
• Drying Time:
  • Touch dry: ~10–15 minutes
  • Handleable: ~1 hour
  • Full cure/hard: 24–48 hours
• Thinning: Use Mr. Color Leveling Thinner (or standard lacquer thinner) at 1:1 to 1:1.5 ratio for airbrushing (0.3–0.5 mm nozzle, 10–15 psi).
• Application:
  • Airbrush: Best method — thin coats (2–4 light passes) for perfectly even matte without frosting.
  • Brush: Possible but difficult — thin heavily and apply very thin layers to avoid brush marks or uneven flatness.
• Best For:
  • Final matte coat on Gunpla (especially weathered or ground-type kits like 08th MS Team GM, Zaku II desert variants, Efreet Schneid, etc.).
  • Achieving realistic matte finishes on military vehicles (tanks, aircraft, armor) where even slight gloss would look unnatural.
  • Sealing decals, panel lining, and weathering pigments before final handling.
  • Any model where the flattest possible finish is desired (e.g., modern Gundam inner frames, military aircraft, or realistic weathering).

Advantages Over Other Clears

• Superior leveling and smoothness compared to standard Mr. Super Clear Flat or GX 113 UV Cut Flat — less prone to clouding/frosting.
• Harder, more durable matte finish than many acrylic mattes — resists fingerprints and minor scratches better.
• Excellent for large surfaces (aircraft fuselages, ship hulls) without orange peel when thinned properly.

Application Tips

1. Prep: Ensure model is fully painted, decaled, panel-lined, and weathered (if desired).
2. Clean: Wipe surface with isopropyl alcohol or Mr. Hobby Tool Cleaner to remove oils/fingerprints.
3. Thin Properly: 1:1 to 1:1.5 with Mr. Color Leveling Thinner — too thick causes frosting; too thin may not flatten evenly.
4. Light Coats: Apply 2–4 very thin coats, 10–15 minutes apart — build matte gradually.
5. Cure Time: Wait 24–48 hours before handling or applying additional pigments/oils.
6. Ventilation: Strong lacquer fumes — use in a well-ventilated area or spray booth.
7. Storage: Keep jar tightly sealed; store upright in a cool, dark place.

GX 114 Super Smooth Clear Flat is one of the flattest and smoothest matte clears on the market — a favorite among Gunpla and military modelers who want a dead-flat, realistic finish without clouding or grain. It's especially popular for weathered 08th MS Team kits, Zeon suits (Zaku II, Gouf Custom, Acguy), and any model where shine would ruin the look.